Skip to main content
Shop Floor

Assigning People on Mobile

Assign people to orders and stages from a phone or tablet using the new mobile assignment tray.

Last updated 21 days ago

Introduction

Assign people from Build on your phone or tablet. Check the order and stage, add the people, then review any check-in prompt before finishing.

Video walkthrough (55 sec): confirm the stage, assign a person, review the check-in prompt, and verify the saved assignment.

Assigning people on mobile happens in 4 steps:

  1. Open the assignment tray

  2. Confirm which stage you're assigning to

  3. Pick your people

  4. Hit Done

Before you start.

  • The mobile layout appears automatically on phones and tablets. There's no setting to turn on.

  • On a phone, the people tray opens from the bottom. On a larger tablet, the people panel can appear beside the work. The layout follows the available screen width.

  • You can assign someone before they arrive. An absent person's work stays planned until check-in. When you finish assigning, review the check-in prompt and confirm only the people who are present.


Step-by-Step Guide

1. Open the Assignment Tray

There are two ways in.

From the top of the screen

  1. Tap the Assign button at the top.

  2. On a phone, the people tray opens from the bottom.

Phone people tray showing Shop Guide Rack and Assembly as the selected work, with Alex Rivera in the search results.

From a specific order

  1. Scroll until you find the order you want.

  2. Tap the Assign people icon on the order card.

  3. On a phone, the people tray opens from the bottom.

Shop Guide Rack in the phone Build view, with the Assign people icon on the order card.

2. Confirm Which Stage You're Assigning To

Check the order and stage in the Assigning to section. The selected stage is also highlighted on the order card. Confirm both before you add people.

If it's the right stage, move on to step 3.

If it's not the right stage, shrink the tray and pick the stage yourself:

  1. Either drag the tray down, or tap the dash at the top of the tray to shrink it to the bottom of the screen.

  2. Scroll to the stage you actually want.

  3. Tap the stage row to select it. Check the highlight and the tray's stage label. Tapping an already selected stage clears the selection.

  4. Tap People to reopen the tray, then check the Assigning to section again.

Assembly selected on the order card with the phone people tray collapsed.

Common mix-up

If the tray shows the wrong stage, shrink it and select the intended stage on the order card. Reopen People and check the order and stage before adding anyone.

3. Pick Your People

Search for the person, then tap the (+) beside their name to assign them to the selected stage. Use the remove (Γ—) control to remove an assignment. Repeat for the people you need.

Alex Rivera selected for Assembly in the phone people tray.

4. Hit Done

Tap Done when you finish assigning. If any selected people are absent, Build asks whether to check them in.

  • Review the names and check-in times. Select Continue for the people who are actually present.

  • Select Skip check-in if they have not arrived. Their work remains planned.

  • Return to Build and check the person on the intended stage. Active work is labelled Active.

Absent-person check-in prompt showing Alex Rivera, the check-in time, Skip check-in and Continue.

Tips and Tricks

  1. Check the stage before adding people. Confirm the order and stage in the Assigning to section. Shrink the phone tray if you need to select a different stage.

  2. Dedicate a tablet to the floor. Same recommendation as Attendance. One device parked in the shop makes assigning a habit instead of a hunt.

  3. You can assign people who haven't clocked in. They'll see the work as soon as they check in.


FAQ

Why does Building Swell look different on my tablet than on my computer?

The layout adjusts to the available width. Phones use a bottom tray for people; larger tablets can show a panel beside the work.

Can I still assign people to any stage I want?

Select the intended available stage on the order card. On a phone, shrink the tray first, tap the stage row, then reopen People. Check the Assigning to section before adding anyone. See step 2 above.

Do I need to check someone in before assigning them?

No. You can prepare their work before they arrive. An absent person's assignment stays planned until check-in. When you tap Done, review the check-in prompt: Continue checks in the people shown; Skip check-in leaves their work planned.

Can I go back to the layout I'm used to?

Yes. Your mobile browser can request the desktop version of the site. See Requesting the Desktop Site on Mobile.

Can I assign more than one person at a time?

Yes. Use the plus beside each person you need, then tap Done and review any check-in prompt.

How do I plan a whole crew's day rather than one stage at a time?

Use the Daily Planner on a larger screen. See Daily Team Planning.


Conclusion

The mobile layout is there so you can assign work from the floor without pinching and zooming. The one thing worth remembering is step 2. Check the stage before you pick your people, and shrink the tray if you need a different one.

Need help? Hit the chat button or click "Ask" in the app. You can also reach us at support@buildingswell.com.